INSTRUCTIONS FOR USE RECRYTE FINISH WT

It is applied with a roller

1. Mix and homogenize the product by hand or machine at low speed.

2. The surface must be dry, free of grease and contaminants.

3. On concrete the surface must be completely set (28 days) and free of moisture

4. The number of layers (2-4) will depend on the absorption of the substrate; On very porous surfaces, a greater number of layers is necessary to avoid the differences in gloss due to the different absorption of the binder in the substrate.

5. The substrate temperature must be above 12 ° C and at least 3 ° above the dew point

6.   The drying time of the different layers is 4-6 hours depending on the weather conditions.

STORAGE INSTRUCTIONS

• RECRYTE FINISH WT must be stored in its original container tightly closed and protected from bad weather.

• Always store in cool places and do not leave exposed to the sun, at a temperature between 5 and 25 ° C during storage.

• Usage time is 12 months from the production date, properly stored.

HYGIENE AND SAFETY

• Use in well-ventilated areas with personal protective equipment.

• Keep out of reach of children.

DISPOSAL AND ENVIRONMENT

• Do not dispose of waste in sewers or water courses.

• Empty containers must be disposed of in accordance with local / national legislation in force