INSTRUCTIONS FOR USE RECRYTE MIPOX

It is applied with a spatula

1. Apply on clean and dry surfaces, free from dust, grease and mold. Old paints must be scratched and cleaned thoroughly to ensure perfect adhesion of the product.

2. Apply a layer of adhesion with RECRYTE PRIMER UNION and let it dry for at least 1 hour, maximum 24 hours. Apply at temperatures between 12 ° - 25 ° C with humidity below 80%

3. The product is pre-dosed in MIPOX COMPONENT A - MIPOX COMPONENT B Add component B to component A and mix thoroughly in the same container, until a mixture is as homogeneous as possible. Add water if it thickens or even if you want a less viscous mixture.

4. Apply one or two coats of MIPOX BASE, allowing it to dry for 6 to 8 hours, depending on the ambient temperature.

5. Regularize the surface to be treated by sanding with 40/80 sandpaper

6. Spread two coats of RECRYTE MIPOX WALL or RECRYTE MIPOX FLOOR with a spatula at intervals of 6 to 8 hours, depending on the temperature. Once the first coat has dried, apply the second coat

7. Once dry, wipe with 80 or thicker sandpaper to remove imperfections.

8. Apply two coats of RECRYTE FINISH WT varnish

9. Leave to dry for approximately 6 to 8 hours

STORAGE INSTRUCTIONS

• Protect containers from extreme temperatures, direct sun exposure and frost, at temperatures between 5 ° and 25 ° during storage

• Usage time is 6 months from production date, properly stored.

HYGIENE AND SAFETY

• Keep out of reach of children.

• Use in well-ventilated areas with personal protective equipment.

DISPOSAL AND ENVIRONMENT

• Do not dispose of waste in sewers or water courses.

• Empty containers must be disposed of in accordance with local / national legislation in force